Overhead cranes purchase points

Overhead cranes are the most common plants and facilities in manufacturing facilities because they have little floor space in the work area. As the name implies, they travel on a set of elevated tracks and have a hook that can be used as a loading or unloading medium. They do not directly interfere with any machinery or equipment and can work around them without creating any obstacles to other operations.best overhead crane supplier

If you want to install a bridge crane in your factory, there are many things you must consider before you buy. Here we are discussing these things to help you make an informed decision.

Overhead cranes purchase points

material

The first thing you need to know is the material you will use to handle the overhead crane. You need to determine if you want to move the finished product, solid steel coil or liquid material. For these special needs, specific types of cranes and auxiliary equipment are required. Inform your manufacturer of your needs and get a quote for available options; this process will help you buy a crane, which will minimize costs, but maximize productivity.Beam The girders are structures that connect parallel running beams, and depending on the application and load carrying capacity, overhead cranes can be designed as single or double beams. To determine the design of the beam, you need to know the rated load, which is the amount of load picked up by the crane. The single beam design preferably has a load capacity ranging from 1 to 15 tons. A double beam design is suitable when the load capacity is outside this range. Service frequency level You need to determine how often the crane is used in your facility. The operating frequency is called the service rating, in other words, the number of choices that will occur in a day of a particular load capacity. The rating standard is from A to F in the US.

Top or bottom type

Usually, there are two types of bridge cranes to choose from – top running and running. Suitable for lower load capacity in the running design. Since the high load does not participate in this design, the crane’s bridge can move on the flange of the runway beam. The beam is completely supported by the roof of the facility. In the top run design, the bridge, as the name implies, travels on top of the runway beam, which is supported by the roof or has a support structure independent of the facility. Obviously, the top design has more load capacity than the running design.bridge crane manufacturer

Energy source

The overhead crane can be driven pneumatically, electrically or manually. Manual cranes have limited capabilities and can be used for small-scale operations. Most commonly, the crane is powered by a three-phase power system. However, pneumatically driven cranes are considered suitable in operations involving oil and gas.

All of these factors should help you make the right purchase decision.

Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *