Debugging the electric chain hoist before use

In the modern society, technology is gradually improving, and many industries are also developing at a rapid speed. The lifting industry is no exception. In the lifting industry, the existence of electric hoist has provided effective help for many industries. With the development of the industry,electric cable hoist manufacturer, There are many more types of such equipment. Next, let’s look at how to debug the electric chain hoist before use. See what maintenance methods are there.

Debugging the electric chain hoist before use:

electric cable hoist manufacturer

This type of equipment is the most complete type of electric hoist, so before using this equipment, the operator must check the lubrication of the lifting chain, because any ready-made lubricant can be used to lubricate the chain, so this article It is recommended that you maintain a small amount of lubricant in the chain bag and try to let the chain soak in the lubricant.

Press the down button of the switch, the device will drop until the limit switch. At this time, the motor will stop automatically. When the button on the switch is pressed, the chain will be retracted into the chain bag. How to maintain in the later stage? The motor will stop running when the chain is fully retracted. Electric chain hoist before use

Maintenance method of electric chain hoist:

After the equipment is used for a long time, the chain will have different degrees of wear and tear, and the outer casing will also be corroded. Therefore, maintenance during the trial period is indispensable, and the equipment is also time-divided during maintenance. Different stages can give you different maintenance results.

First of all, when working, when the oil in the gearbox starts to operate for several hours, it is necessary to check the lubricating oil in time. It is necessary to check the lubricating oil in the third month after use. If it is not enough, it needs to be timely.

Secondly, when the equipment is working in the open air, it is necessary to install rainproof equipment. When using it, the market needs to keep the equipment parts dry. After the operation is completed, keep the equipment away from the wet area, high temperature area and chemical area. Only in this way can the equipment be safe. Best gantry crane manufacturer

This is the relevant introduction for the electric chain hoist. I hope that these contents can let you know that when using this kind of equipment, not only the test but also the maintenance should be paid in advance. Only in this way can the equipment run smoothly and at the same time Ensure the safety of the use of the equipment.

Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *